Cleaning
125
Cleaning the Sampling Area
1 If required, remove the meter from the
Handheld Base Unit and place it horizon-
tally on a table.
2 Remove the sample application cover by
pulling it forward horizontally (in the
direction of the arrow).
In case of significant dirt or contamina-
tion, you can rinse the sample application
cover (separately from the meter) under
warm running water. Dry the sample
application cover with a fresh tissue.
3 Clean the outside of the meter with a
lightly moistened tissue. Then dry the
meter with a fresh tissue.
To Next Page
Loading...
Need help?
General
