Quality Control
106
Performing a Quality Control Test
Quality Control (QC)
1 Turn the meter on by pressing the On/Off
button for longer than 5 seconds.
Note: You can also turn on the meter directly
by connecting the handheld power supply.
2 To turn the meter off after use, press the
button for longer than 2 seconds.
Note: Depending on the system settings the
operator my have to log in and/or enter a
password. Follow the procedures as
described on page 90.
3 Wait until the main menu is displayed.
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
To Next Page
Loading...
Need help?
General
