Roche cobas h 232 - Page 27

Meter Setup
27
* Settings that are in the meter when it leaves the factory are labelled with an asterisk (*).
Group Subgroup Setting Values *
Lockout Operator Lockout (only if “Operator ID”
option is enabled)
No *
Daily
Weekly
Monthly
Every 3 months
Every 6 months
Yearly
QC Settings
New Lot Lockout Yes
No *
QC Lockout No *
Daily
Weekly
Monthly
IQC Lockout No *
Daily
Weekly
Monthly
QC Result Format Pass/Fail *
Value
Value & Pass/Fail
Reset Test Param. Do Reset
No Reset *
Cleaning Lockout
No *
Daily
Weekly
Monthly
STAT Test Config.
Enable
Disable *