Meter Setup
51
The Sel. Res. Storage Mode menu tells the meter what to do when the memory is full.
In case of a full memory, you can choose between:
■ No Result Deletion. This prevents data from being deleted inadvertently, but may (in case
of a full memory) lead to the situation, that you can’t perform a new measurement. Further
measurements will only be possible, if stored data are transferred to the host system or
you allow automatic deletion.
■ Del. Oldest Result. Based on the 1st in/1st out principle, the oldest result will be auto-
matically deleted when necessary. This is the only option if the meter is used without a
PC/host system (i.e. no data will be transferred and archived).
However, you only can select between these two options, if the meter is used together with a PC/
host system and the Computer connection is enabled. In this case data stored in the meter are
flagged, as soon as they have been transferred to the computer. Now the meter is allowed to
delete those flagged data when necessary, even if you have selected the No Result Deletion
option.
Note: The meter memory can store a maximum of 500 samples, 500 liquid controls, and 200
instrument quality controls.
7 From the Result Memory menu, touch
Result Storage Mode to select your
storage mode.
You may select from the following options:
■ No Result Deletion
■ Del(ete) Oldest Result
8 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
The display automatically returns to the
previous screen.
9 Touch to return to the Data Handling
menu.
09:15 am
Result Storage Mode
Result Display Mode
Setup - Result Memory
Sel. Res. Storage Mode
09:15 am
Del. Oldest Result
No Result Deletion
To Next Page
Loading...
Need help?
General
