Roche cobas h 232 - Page 55

Meter Setup
55
4 Using the onscreen keypad, enter the
Administrator ID of choice (or the pass-
word provided by Roche Diagnostics). The
ID should include up to 20 characters
and/or letters of choice. Pay close atten-
tion to the buttons you press, because the
ID is displayed on the screen only as
asterisks (similar to entering a password
on a computer).
5 Use to switch to the input of numbers
and special characters.
6 Use to switch back to the input of
letters.
7 Use to backspace and correct a
mistake.
8 Touch to save this Administrator ID,
or:
Touch to exit this menu without
saving any changes.
A
****|
BCDE
FGHI J
KLMNO
PQRST
UVWX Y
Z , 123
Enter Administrator ID
Enter Administrator ID
01234
56789
ÁÉ ÍÓÚ
ÑÇÜABC
-,.;/
****|
123
ABC