Meter Setup
81
The additional status information is displayed after switching on the meter or after logging off as
an operator. This includes information about current lockouts, the number of results not trans-
ferred (to the host system) and the time since the last data transfer.
In environments with multiple operators, it can be useful to display a test only if the operator
carrying out the test is present. By requiring operators to login again before displaying results,
you ensure that only authorised persons view the results.
3 Touch Start Info.
4 Touch the button to select the state of the
status display. Your selection is now high-
lighted.
5 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
6 Touch Result Login.
7 Touch the button to select the state of the
option. Your selection is now highlighted.
8 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
09:15 am
Result Login
Result Confirmation
Comment Result
Start Info
Setup - Optional Screens
09:15 am
Disable
Enable
Start Info Screen
09:15 am
Result Login
Result Confirmation
Comment Result
Start Info
Setup - Optional Screens
09:15 am
Disable
Enable
Result Login Screen
To Next Page
Loading...
Need help?
General
