Rockwell Automation Publication 1769-UM021I-EN-P - May 2018 111
Complete Software Tasks Required at CompactLogix 5370 Controller Installation Chapter 5
4. Choose the controller catalog number and click Next.
5. Expand the network until you see the controller.
6. Choose the controller at the first instance in which it appears, as shown
in the following graphic, and click OK.
IMPORTANT If you expand the controller, that is, expand the network beyond the
first instance in which it appears on the left side of the screen, you
receive the following message:
• The target device is not in the proper mode to accept an update
in ControlFLASH.
To Next Page
Loading...
Need help?
General
