Rockwell Automation Allen-Bradley PowerMonitor 5000 Unit - Page 111

Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 111
Chapter 6
Logging
This section describes the functions of the PowerMonitor™ 5000 unit. Most
functions require you to configure set-up parameters to align the unit with your
installation and your application requirements. The set-up parameters are listed
by name and described in this section. You can view set-up parameters by using
the PowerMonitor 5000 web page, and when logged in to an Admin account,
make changes to the setup. Set-up parameters are also accessible by using
communication.
See the PowerMonitor 5000 Unit Data Tables
, in Appendix A, for additional
information on setup parameters including the following:
• Range of valid values
• Default values
•Data type
Set-up parameters can be found in data tables with names beginning with
‘Configuration’, for instance Configuration.Metering_Basic.
Topic Page
Logging Overview 112
Waveform Log (M6 and M8 model) 118
Energy Log 134
Data Log 138
Min/Max Log 148
Load Factor Log 155
Time-of-use (TOU) Log 156
Event Log 159
Setpoint Log 163
Alarm Log 165
Power Quality Log (M6 and M8 model) 171
Trigger Data Log (M6 and M8 model) 176
Snapshot Log 179
EN 50160 Weekly and Yearly Logs 181