496 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Appendix J Installing the Add-on Profile
Install the AOP
Make sure that the Logix Designer application is not running before starting the
installation. To install the Add-on Profile, follow the on-screen instructions.
1. To locate the folder where the installation files were downloaded, use
Windows Explorer.
The full path to access the folder is: C:\RA\Add-on-Profiles
2. Extract the files to a local folder.
The files must be extracted; the Add-on Profile cannot be installed from
the zip file.
3. In that folder, open the folder PM5000 and launch MPSetup.exe to begin
the installation.
4. In the Logix Designer application Module Setup dialog box, click Next.
To Next Page
Loading...
