Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 209
Chapter 8
Other Functions
This section describes the functions of the PowerMonitor™ 5000 unit. Most
functions require you to configure set-up parameters to align the unit with your
installation and your application requirements. The set-up parameters are listed
by name and described in this section. You can view set-up parameters by using
the PowerMonitor 5000 web page, and when logged in to an Admin account,
make changes to the setup. Set-up parameters are also accessible by using
communication.
See the PowerMonitor 5000 Unit Data Tables
in Appendix A for additional
information on setup parameters including the following:
• Range of valid values
• Default values
•Data type
Set-up parameters can be found in data tables with names beginning with
‘Configuration’, for instance Configuration.Metering_Basic.
Security
The PowerMonitor 5000 unit protects access against unauthorized set-up
changes through an account-based security system.
With security disabled, any application or web page user effectively has admin
privileges. We do not recommend operating the unit with security that is disabled
except during evaluation, testing, or initial setup.
See Configure Initial Security
on page 56 for the procedure to enable security if
desired and create one or more Admin class accounts for configuration access
from the Ethernet network.
Table Page
Security 209
Date and Time Functions 211
Network Time Synchronization 213
System Error Response 217
Miscellaneous Commands 218
IMPORTANT Security is disabled by default.
To Next Page
Loading...
