Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 159
Logging Chapter 6
Event Log
The event log records the date and time of changes that are made to the device
and of external events. The event log is up to 100 records deep. The event log
cannot be cleared.
The Event_Log_Mode parameter determines what happens when log is full:
• If 0 = Stop logging, no more event data is logged.
• If 1 = Overwrite oldest record, event logging continues and oldest events
are deleted.
Event Log Results
Event log records can be retrieved from the PowerMonitor 5000 web page or
FTP server. Event log records can also be retrieved sequentially by using the data
table interface.
File Name
The event log is named Event_Log.csv.
Logged Parameters
The event log operates in a circular, or FIFO fashion. The first record is a header
naming the logged parameters. Each subsequent record is a structure of INT16
elements containing the following parameters.
Table 20 - Event Log Logged Parameters
Tag Name Description
Event_Record_Identifier Used to verify record sequence when returning multiple
records.
Event_Timestamp_Year The year when the record was recorded.
Event_Timestamp_Mth_Day The month and day when the record was recorded.
Event_Timestamp_Hr_Min The hour and minute when the record was recorded.
Event_Timestamp_Sec_ms The seconds and milliseconds when the record was
recorded.
Event Type Indicates the type of event that has occurred.
General Code Indicates general information about the status event.
Information Code Indicates specific information about the status event.
To Next Page
Loading...
Need help?
General
