Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 127
Logging Chapter 6
14. Set the Destination Element (3) to Waveform_Log_Results[0].
PCCC Method to Retrieve Waveforms
These steps are for the PCCC method. If you choose this method, continue only
with this method until finished.
1. To communicate to the device within the I/O tree, click the ellipses on the
MSG component and select Communication.
2. Click Browse and select your device module in the I/O tree.
Complete this step for ALL message components.
The PCCC method is similar to the CIP method.
To Next Page
Loading...
