164 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Chapter 6 Logging
Setup
• Basic metering setup
• Setpoints 1…5 configuration
• Setpoints 6…10 configuration
• Setpoints 11…15 configuration
• Setpoints 16…20 configuration
• Setpoint Logic configuration
• Setpoint Outputs configuration
• Date and Time setup
• Logging configuration
Commands
•Clear Setpoint Log
• Clear Setpoint Accumulators
Related Functions
Setpoint configuration and operation.
Output_Action Configured action when actuated.
Accumulated_Time Total accumulation in seconds.
Number_Of_Transitions Number of transitions from off to on.
Table 22 - Setpoint Log Logged Parameters (continued)
Item Name Description
To Next Page
Loading...
