Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 237
Communication Chapter 9
3. When the topic configuration window appears, click New.
A new, unnamed topic in the left pane is created.
4. Give the topic a name pertinent to your application.
5. In the right pane, with the Data Source tab selected, browse to the
PowerMonitor 5000 unit by using the previously configured driver.
6. With the topic highlighted in the left pane, and the PowerMonitor 5000
unit that is highlighted in the right pane, click Apply.
7. Click the Data Collection tab.
To Next Page
Loading...
