36 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Chapter 2 Install the PowerMonitor 5000 Unit
13. Right-click on the zipped folder and extract the files.
14. Right-click on zipped folder RNDIS_01.zip and extract files.
15. Close the Rockwell Automation® Download Manager and sign out of
RockwellAutomation.com.
Install Drivers
To install the USB driver, follow these steps.
The following procedure applies to the Windows 7 operating system. Installation
and connection configuration steps vary with different operating systems.
1. Connect the PowerMonitor 5000 unit to your computer by using a USB
cable and apply power to the power monitor.
If the device does not automatically install or fails to install, follow these
steps.
2. Open the Start menu and search for Device Manager.
To Next Page
Loading...
