440 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Appendix C PowerMonitor 5000 Display Module, Series B Application Summary
The Controller Settings screen displays to let you configure the IP
addresses of the power monitors.
10. Use the up or down arrows to select PM5000_# to update the IP addresses.
The # is either 1, 2, or 3 corresponding to the target power monitor.
11. To modify the IP address of the power monitor, press the address field in
the blue box.
A keyboard appears.
Type in the IP address of the PowerMonitor unit and then press the
Return key to enter.
To Next Page
Loading...
