Instrument Functions
NRP2
109User Manual 1173.9140.02 ─ 07
"1"
SWR, RCoeff
"dB"
RLoss
Remote command:
UNIT<[1]..8>:POWer
on page 336
UNIT<[1]..8>:POWer:RATio on page 336
4.4.3.5 Displaying additional information
In display mode "Dig", up to three further values with helpful information can be dis-
played in the results window, in addition to the current measurement result.
Fig. 4-41: Function & Unit dialog box, Auxiliaries
Example:
In the example, the auxiliary function is set to "Extremes", i.e. the maximum, the mini-
mum and the max-min value are indicated.
See also chapter 3.6.2, "Special symbols", on page 58 for information concerning the
displayed symbols and values.
The R&S
NRP2 continuously saves the data that is required for the display of extreme
and statistic values. The data memory can be erased any time with "Aux Val Reset" in
the "Measurement" menu, see also chapter 4.4.6, "Resetting auxiliary information",
on page 112.
Aux.
Selects the additional information to be displayed
"None"
Displays no additional information.
Configuring measurements
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
