Administration
123
User Manual | 2906.2506.02 - 01
Integration into an IP Network
R&S VENICE S
Installing the IP Software
Perform the following steps:
1.
Download the latest RSI release package from GLORIS
https://gloris.rohde-schwarz.com
2. Start the RSI executable on your Windows client PC that is connected to
the same management network the R&S VENICE S is connected to.
3. Click through the installation menu until you can select servers.
4. Select all R&S VENICE S servers you want to update and start the
installation.
Channel Configuration
Perform the following steps:
1. Open the R&S®Device Manager as described in "Configuring the IP
interfaces" (page 120) and select the corresponding video server.
2. Navigate to Video settings > HD/UHD.
3. Select SMPTE2110HD or SMPTE2110UHD as mode for all available
cards.
4. Press Apply to confirm your settings.
If the firmware of the server’s video I/O card was changed, the server will be
automatically cold rebooted.
This triggers a restart of the R&S VENICE S server.
To Next Page
Loading...