Installation and Configuration
79
User Manual | 2906.2506.02 - 01
Shutting Down the System
R&S VENICE S
Shutting Down the System
There are several possibilities to shut down the system. It depends on
whether the operating system is already loaded, frozen or not completely
loaded. Please act accordingly.
Shut Down While Running
Perform the following steps:
• Enter poweroff in the command line of the R&S VENICE S.
The operating system will save your personal settings and once it has
ended, the system will turn off.
System is shut down.
Shut Down With Operating System Frozen or Not
Completely Loaded
If the operating system is not responding anymore or not completely loaded,
do as follows:
Perform the following steps:
• Shut down the system by pressing the power switch lengthly until the
system turns off.
The system is shut down.
Re-start
It takes a while to safely erase all memory banks of the
system.
After a shut-down wait at least ten seconds before starting
the system again.
Corrupted Data
Shutting down the system while frozen or not completely
loaded may lead to corrupted system data.
Use this procedure only if absolutely necessary.
To Next Page
Loading...