Product Description
41
User Manual | 2906.2506.02 - 01
The Rear of the System
R&S VENICE S
LTC In/Out
HD Sub-D connector
Besides the timecode options which are described in chapter “Timecode” on
page 31 R&S VENICE S gives you the possibility to use LTC timecode on
each channel for ingest and playout. Receive or provide LTC timecode with
the supplied Lynx cable (see chapter “Lynx CBL-AES1604 Cable” on
page 59).
Via the R&S
®
Device Manager it‘s possible to assign LTC timecode that is
received by one channel to all other channels.
11 HD-BNC connector N/A Downconvert video output
For more information see chapter “Downconvert Video Output” on
page 43.
12 SFP+ port (4) N/A In-/Output of digital video signals
For more information see chapter “In-/Output of Digital Video Signals”
on page 45.
13 OCP NIC ports
(optional)
Two 10 Gbps SFP+/10 GbE T connectors. For more information see
"Network Interface (NIC) Connectors" on page 49.
14 NIC ports Two 1 Gbps NIC connectors. For more information see "Network Inter-
face (NIC) Connectors" on page 49.
To Next Page
Loading...