Maintenance
161
User Manual | 2906.2506.02 - 01
Replacing a Cooling Fan Assembly
R&S VENICE S
5.
Lock the new cooling fan assembly into the chassis by lowering the
release levers until firmly seated.
6. Install the system cover as described in chapter “Installing the System
Cover” on page 154.
Replacing a Cooling Fan
Requirements: Follow the safety guidelines listed in chapter “Safety Instructions” on
page 152 and chapter “Safety and regulatory information” on page 7.
If applicable, remove the system from the rack.
Remove the system cover as described in chapter “Removing the
System Cover” on page 154.
Cooling Problems
The cooling fans are hot-swappable, but to main-
tain proper cooling while the system is on, it is
important to replace only one fan at a time.
Replace only one fan at a time.
To Next Page
Loading...