Operation
Configuring the Subtitles
R&S VENICE S
92
User Manual | 2906.2506.02 - 01
Configuring the Subtitles
This section describes the configuration of subtitles for the VENICE S
system using the R&S
®
Device Manager.
The following topics are covered:
● Subtitle Configuration in Device Manager (page 92)
● VDCP Subtitle Parameters (page 93)
Subtitle Configuration in Device Manager
To access the subtitle configuration settings in Device Manager, select the
associated system within the Workspace and navigate to "Video Settings" >
"Record" > "Subtitle Configuration".
Subtitle Configuration
Record Subtitle
Type
Determines whether subtitle recording is enabled or not (Off)
and which type of subtitles (Scc1, Scc3 or Stl) should be
recorded.
SCC Start From
Mode
Specifies the start mode determination method for SCC:
● StartZero: Read/Write: SCC files always start at 0.
● ParentTC: Read/Write: SCC files derive the starting point
from the first video TC.
● Guess: Read: Try to guess whether the SCC file starts
with 0 or with the video TC. Write: Same as ParentTC.
● UserDefined: Read/Write: The start is user-defined.
SCC Drop Frame Specifies the dropframe-mode determination method for SCC.
● Auto: SCC files dropframe-mode is determined by the
video stream.
● NoneDropFrame: SCC files are always non-dropframe.
● DropFrame: SCC files are always dropframe.
Start Frame
Number
Determines the frame number of the first video frame calcu-
lated from the start time code for SCC and STL.
To Next Page
Loading...