Administration
User Management
R&S VENICE S
96
User Manual | 2906.2506.02 - 01
User Management
To integrate R&S VENICE S into an existing environment it is necessary to
be able to change the user permissions.
To achieve this, observe the following:
● Changing the Passwords (page 96)
● Changing the User ID (page 97)
● Adding Samba Users (page 98)
Changing the Passwords
To ensure the safety of systems connected in a network and/or to the
Internet, we highly recommend to change the default password on both the
R&S VENICE S server as well as the on the web UI interface of
R&S®Device Manager as soon as the initial setup is completed.
Changing the server password
Perform the following steps:
1.
Log in to the server as root user either directly or via SSH using the
default/existing password. The root user is the account that has full
access to all files, applications, and system functions.
2. At the prompt, type "passwd root" and press "Enter":
3. The system will prompt you to enter the current password. Do so, then
follow the prompts to define and confirm a new root password.
The password change takes effect immediately.
The steps below are valid for R&S VENICE S with software 3.5 or
higher.
To Next Page
Loading...