Working with the R&S Installer (RSI)R&S VENICE S
143
User Manual | 2906.2506.02 - 01
Working with the R&S Installer (RSI)
The Rohde & Schwarz Installer (RSI) is used to install the entire software
environment required to operate R&S systems. The RSI is an executable
that needs to run on a computer with a Windows operating system in order
to update one or more R&S systems over the network.
This chapter is divided into the following sections:
● Types of RSI Packages (page 144)
● Using an RSI (page 145)
● RSI Troubleshooting (page 147)
To Next Page
Loading...