Rohde & Schwarz R&S VENICE S800/824-G3 - Network Ports; VENICE S Server Ports (Information)

Product Description
Network Ports
R&S VENICE S
60
User Manual | 2906.2506.02 - 01
Network Ports
This section lists the default TCP and UDP ports used by both the R&S
VENICE S Server and the R&S VENICE S Client. All ports are open by
default.
The following topics are covered:
● VENICE S Server Ports (Information) (page 60)
● VENICE S Server Ports (Configuration) (page 64)
● VENICE S Client Ports (Information) (page 66)
● VENICE S Client Ports (Configuration) (page 68)
VENICE S Server Ports (Information)
Port Type Direction Info Remarks
* * in & out The built-in network adapaters
for ST2110 traffic are reserved
for ST2110 only.
This is the dedicated
audio/video interface for
customers that want to use
video connectivity via ST2110.
3702 UDP in & out WSDD service discovery udp multicast to/from ip
239.255.255.250:
In some versions this port can
be configured in
/etc/opt/rohde-
schwarz/Venice/VeniceWeb-
Service.conf as entry
WsddBroadcastPort (which is
not present by default)
443 TCP in Device Manager tcp / https service listening:
Standard web server for
browser based configuration
tool "Device Manager".
If accessing via insecure port
80, users are redirectes to port
443 using secure http connec-
tion.
8070 TCP in & out Maintenance service tcp / https service listening:
This interface controls overall
VENICE server configuration
and options