Rohde & Schwarz R&S VENICE S800/824-G3 - Page 126

Administration
Integration into an IP Network
R&S VENICE S
126
User Manual | 2906.2506.02 - 01
5.
Select SYNC CONFIGURATION and set SYNC MODE to PTP.
6. Repeat steps 4 and 5 with CURRENT CHANNEL being set to 11.
7. Press Apply to confirm your settings.
Using the R&S
VENICE Web
Service
(VeniceWS)
Perform the following steps:
1. Use the VeniceWS SOAP request querySyncConfigurationRequest
to check if R&S VENICE S uses PTP synchronization mode. Send the
following command to [Management-IP]:8011 and [Management-
IP]:8021:
<soapenv:Envelope
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:urn="urn:rus:webservices:venice">
<soapenv:Header/>
<soapenv:Body>
<urn:querySyncConfigurationRequest/>
</soapenv:Body>
</soapenv:Envelope>