Operation
89
User Manual | 2906.2506.02 - 01
Configuring VENICE S Services
R&S VENICE S
4.
If the system runs in another mode than VDCP select the running mode
(e.g. FIMS).
5. Click Disconnect to make the channel available for the VDCP mode.
6. Select the VDCP mode in the Automation Control settings.
7. Enter a valid Path to a local or a central storage for each channel.
8. Activate InitiallyLocked for each channel.
9. Click Connect to start the VDCP mode of the respective channel.
A successfully started connection of a channel in VDCP mode will be indi-
cated in the system view.
To Next Page
Loading...