Chapter 5 Operation
5300.9677.71 - 5.28 - EN-4
2.4 Logbook Menu
You can use the Logbook menu to query status and error messages about the transmitter.
The Logbook menu windows provide an overview of status, warning and fault messages
about the transmitter.
Note You can call Logbook entries via the Summary, Status, Warning and Fault windows. The
structure of the four windows is identical.
Entry/display Description
Operation Mode Setting for the operating status of the transmitter (On/Off)
TX Sum Fault There is a general transmitter fault.
TX Sum Warning There is a general transmitter warning.
Reset on program off In the ON switch position, a Reset Fault is automatically triggered when
the RF output is locked (Program = OFF).
To Next Page
Loading...
