Rohde & Schwarz SR8000 Series - AC Supply; Rear Panel Connections

Chapter 3 Installation
5300.9677.72 - 3.6 - EN-4
Fig. 3 Ground connection on rear panel of R&S SR8130 transmitter and R&S VU813 amplifier
1) R&S SR8130
2) R&S VU813
2.1.2 AC Supply
The R&S SR8010/SR8025/SR8050 and SR8100 transmitters are operated by means of a
low power device connecting cable. The current-carrying capacity is 10 A.
The R&S SR8130 transmitter and the R&S VU813 amplifier are operated by means of a
special 2.5 mm
2
connecting cable. The current-carrying capacity must be adjusted to suit
local regulations.
) Install appropriate fuses to protect the installation.
2.2 Rear Panel Connections
Fig. 4 Connections on rear panel of R&S SR8010 transmitter