Chapter 8 Service
5300.9677.72 - 8.10 - EN-4
4 Replacing Fuses on the Power Supply
4.1 R&S SR8010
Two fuses are fitted in the line filter below the AC supply connector of the transmitter. The
fuses can be accessed from outside at the rear of the transmitter.
1. Push out the fuse holder below the AC supply socket using a screwdriver.
Fig. 6 Pushing out line filter complete with fuses
2. Pull the fuse holder out.
DANGER!
Risk of electric shock! De-energize the unit before removing the fuses.
To Next Page
Loading...
