Rohde & Schwarz SR8000 Series - Exciter > Input > Analog Audio Menu Window; Exciter > Input Menu

Chapter 5 Operation
5300.9677.71 - 5.47 - EN-4
2.7.2 Exciter > Input Menu
The menu windows in the Input menu are used to set the parameters for input signal pro-
cessing. It is also possible to query the status of the inputs.
2.7.2.1 Exciter > Input > Analog Audio Menu Window
In the Analog Audio menu window you can set thresholds for analog audio.
Ch State Valid Indicates whether the decoded status displays of the AES channel are
valid
The following states are possible:
– Off
The input is not active.
– Status Valid
The input is active and the status of the AES channel is valid.
– Status Not Valid
The displayed receiver status is not valid.
The input is marked as faulty, and switchover takes place if neces-
sary.
Ch State CRC Indicates whether the receiver has detected CRC errors in the status
bits of the AES channel
Parity/Biphase Indicates whether the receiver has detected an error in the AES/EBU
frame
The following states are possible:
– Off
The input is not active.
– OK
The input is active and there are no errors.
– Parity or Biphase Error
The input is active but a parity or biphase error has occurred.
The input is marked as faulty, and switchover takes place if neces-
sary.
Clock Indicates whether the receiver has detected a clock signal
The following states are possible:
– Off
The input is not active.
– OK
The input is active and the clock signal is available.
– No Clock
The input is active and the clock signal is not available.
The input is marked as faulty, and switchover takes place if neces-
sary.
Display Explanation