Chapter 5 Operation
5300.9677.71 - 5.36 - EN-4
2.5.6 Setup > BitBus Menu Window
Use the BitBus menu window to activate and configure BitBus communication via Ethernet
or RS-232-C.
2.6 Device Info Menu
You can use the Device Info menu to display detailed product information about any hard-
ware or software component of the transmitter.
Setting item Description
BitBus Protocol Switches BitBus communication on and off
Remote Interface For choosing the remote-control interface for BitBus communication
(Ethernet for X6, RS232 for X41)
TCP Port Selects the port for the BitBus communication via Ethernet
Checksum Switches CRC-secured transmission on/off
The same setting must be made for the recipient of BitBus messages.
Display Description
Connected On: Indicates that a BitBus connection to the called station exists
Context menu Description
Reconnect This function is used to reestablish the connection after the BitBus set-
tings have been changed
To Next Page
Loading...
