Rohde & Schwarz SR8000 Series - Setup > Common Menu Window; Setup Menu

Chapter 5 Operation
5300.9677.71 - 5.30 - EN-4
2.5 Setup Menu
You can use the Setup menu to configure the transmitter system's hardware.
2.5.1 Setup > Common Menu Window
You can use the Common menu window to enter general system settings.
Function Explanation
Clear logbook Clears all entries in the current logbook. Note that it is not possible to
clear individual entries.
When you clear the complete logbook, the partial logbooks are also
cleared.
Restore logbook Restores the cleared entries in the current logbook.
When you restore the complete logbook, the partial logbooks are also
restored.
Selection Explanation
Date Current date
Time Local time
Display Timeout Time in minutes after which the display switches off (standby)
Display Brightness Used to adjust the display brightness (values 1 to 10)
Display Contrast Used to adjust the display contrast (values 1 - 10)