Chapter 3 Installation
5300.9677.72 - 3.10 - EN-4
2.4 R&S SR8250A: Connecting Standalone Instruments
Fig. 8 Connections between R&S SR8130 (above) and R&S VU813 (below)
R&S SR8250A internal cabling
No. in
illustra-
tion.
R&S SR8130 R&S VU813 Meaning of connection
1 X61 RF OUT SPLIT X61 RF IN SPLIT RF cable from exciter power splitter
to R&S VU813 signal input
2 X22B X22 Control cable to amplifier control
unit
3 X2 RF OUT X10 RF cable from R&S SR8130 ampli-
fier output to coupler
4 — X2 — X11 RF cable from R&S VU813 amplifier
output to coupler
ATTENTION!
To ensure that the system operates correctly, only the original cables supplied should be
used for making the connections.
To Next Page
Loading...
