Chapter 5 Operation
5300.9677.71 - 5.5 - EN-4
1 General Information
Transmitters are operated via the transmitter's own graphical interface in the following
ways:
– Locally via the display and menu keys on the front panel
– Via a web browser.
If the unit is operated via the web browser of an attached PC/client computer, two modes
are possible:
– Direct operation via a locally connected PC
– Remote operation via a remote network client.
1.1 Authorizations and Menu Levels
There are different authorizations and menu levels for operating the transmitter.
Authorizations define which parameters and configurations you are allowed to change.
Menu levels (maximum three) allow you to access the parameters you can select.
1.1.1 Authorizations
Various authorization levels protect against nondeliberate access of critical system settings
from the home menu. When you start local operation, your user ID is Operation by default.
Note The User Administration tool (called via browser-based operation) can be used to change,
create or delete user profiles.
From the Change User context menu, you can log on in any menu under a different user ID.
Note When in local operation mode, you do not need to enter a password to change the user ID.
The following user profiles are factory-set:
To Next Page
Loading...
