Chapter 3 Installation
5300.9677.72 - 3.5 - EN-4
2Cabling
2.1 AC Power Supply
2.1.1 Connecting Transmitter Ground
The grounding bolt is on the rear panel of the transmitter.
) Secure the external ground conductor to the grounding bolt.
Fig. 1 Ground connection on rear panel of R&S SR8010 transmitter
Fig. 2 Ground connection on rear panel of R&S SR8025/SR8050/SR8100 transmitter
ATTENTION!
Do not connect any devices to the AC supply until all cabling has been completed.
ATTENTION!
For safety reasons, the transmitter must be connected to the station's main ground termi-
nal.
To Next Page
Loading...
