Rohde ST 411 - 1 Introduction; Preface; Contact; Scope of Delivery

50 / 327 - EN -
1. Introduction
1.1. Preface
You have chosen an ST 630/ST 632 controller, a high-quality product for your kiln. This controller series incorporates
the latest technological features, is being continuously developed and is the leader in its class.
After reading this instruction manual, you will be familiar with the functionality of the ST 630/ST 632 controller.
Please make sure that you fully understand the kiln manufacturer’s safety instructions.
Make sure that the control unit is mounted at a safe distance from the kiln and is not exposed to direct heat from the
kiln.
Do not place the control unit on top of the kiln.
The images shown in this instruction manual illustrate the functions and may differ in some ways from the actual
product.
1.2. Contact
1.3. Scope of delivery
No. Part Remark
1
ST 630 or ST 632 control unit Type varies depending on the version
2
Control unit bracket For attachment to the kiln or wall
3
Mounting material for bracket For attachment to the kiln or wall
4
USB flash drive Data transfer of recorded measured values
5
Instruction Manual