Roland AE-30 - Making Settings in the Menu; Making System Settings and Scene Settings; System Settings

13
Settings Used on this Instrument
Assigning a continuously-variable controller (Breath_1–Motion_2)
* Indications of “***” in the table will contain the following names.
Breath_1–8, BiteDn_1–4, BiteUp_1–4, LeverDn_1–2, LeverUp_1–2, ThumbPad_1–4, Motion_1–2
* For controllers whose Func parameter is “O,” their parameters related to the assign settings are not shown.
Indication (Parameter)
Value Explanation
*** Func
See “Assign Function (MIDI) List”
(p. 13)
Specify the function that is assigned to a continuously-operated controller.
*** In Min
0–127
Specify the minimum value (Min) and
maximum value (Max) in which controller
operations are eective.
& “Function assignment (continuous
operation)” (p. 11)
*** In Max
*** Out Min
0–127
Specify the minimum value (Min) and
maximum value (Max) in which the assigned
function operates.
*** Out Max
*** Mode
Species the operation mode.
Latch
Each operation switches between Output Min Value and Output Max Value.
Momentary
The function operates like a graph “Function assignment (continuous operation),”
according to how you operate the controller.
*** Curve
Species the operation curve when the operation mode is “Momentary.”
1: Linear 2: Exp L 3: Exp M1 4: Exp M2 5: Exp H
6: Log L 7: Log M1 8: Log M2 9: Log H
10: S-Shape 11: Reverse S 12: Step
Assigning a switch-type controller (S1_1–Ta_2)
* Indications of “***” in the table will contain the following names.
S1_1–2, S2_1–2, X_1–2, C1_1–2, C2_1–2, C3_1–2, C4_1–2, C5_1–2, Tc_1–2, Ta_1–2
* For controllers whose Func parameter is “O,” their parameters related to the assign settings are not shown.
Indication (Parameter)
Value Explanation
*** Func
See “Assign Function (MIDI) List”
(p. 13)
Species the function that is assigned when each controller is pressed.
*** Release Val
0–127
Specify the value when you take your nger o the button (Release) and the value
when you press the button (Press).
*** Press Val
*** Mode
Species the operation mode.
Latch
Each time you press the button, the Press Value and Release Value alternate.
Momentary
The Press Value is applied while the button is pressed, and the Release Value is applied
while the button is released.
Assign Function (MIDI) List
Value Variable range Explanation Remarks
O
No function is assigned.
The side keys follow the ngering mode settings.
CC 01–31, CC33–95 0–127 Control change
Bend Down 00 00–00 40 Bend down
Bend Up 00 40–7F 7F Bend up
After Touch 0–127 After touch (Channel Key Pressure)
Drone Sw O, On Turns the drone function on. Not available for breath or bite control
Harmony Sw O, On Turns the harmony on.
Start/Stop O, On Outputs a start (FA)/stop (FC) signal. Not available for breath or bite control