Roland AE-30 - Page 33

33
Scene Parameters
6 SRV-2000NL (NON-LINEAR)
Parameter Value Explanation
PreDelay 0–120
Adjusts the delay time from the
direct sound until the reverb
sound is heard.
ReverbTime -0.9–99.0 (sec)
Adjusts the decay length of the
reverb sound.
GateTime 10–450
Adjusts the time from when the
reverb starts being heard until
the reverb sound is cut o.
EQ Low Freq 0.04–1.00 (kHz) Frequency of the low range.
EQ Low Gain -24–+12 (dB) Gain of the low range.
EQ Mid Freq 0.25–9.99 (kHz) Frequency of the middle range.
EQ Mid Gain -24–+12 (dB) Gain of the middle range.
EQ Mid Q 0.2–9.0
Width of the middle range.
Set a higher value to narrow the
range to be aected.
EQ Hi Freq 0.80–9.99 (kHz) Frequency of the high range.
EQ Hi Gain -24–+12 (dB) Gain of the high range
EQ Hi Q 0.2–9.0
Species the width of the high-
frequency range.
Set a higher value to narrow the
range to be aected.
7 GM2 Reverb
Parameter Value Explanation
Character
SMALL ROOM,
MEDIUM ROOM,
LARGE ROOM,
MEDIUM HALL,
LARGE HALL,
PLATE
Selects the type of reverb.
Time 0–127
Adjusts the decay length of the
reverb sound.