18
Basic Operation
Dual-monitor Operations
With a V-1200HDR unit or V-1200HD RCS, you make various settings by manipulating the dual monitors.
Menu Operations
Menu operations follow the procedure described below.
1. Tap the screen to select a setting item.
The item is conrmed and the next screen appears.
5 The start of the menus is the ROOT MENU screen.
5 When the menu has several layers, repeat this operation until you reach the desired item to select.
5 The following operations return you to the previous screen.
5 Tap near the
button at the top right of the screen.
5 Tap a location on the monitor that is away from the displayed screen, or tap the cross point display.
2. Change the setting value.
5 With setting items for which you can freely set any value, tapping the setting value displays a red background. Turn the [VALUE] dial to change the
value.
In V-1200HD RCS, you can use [] and [] on the computer keyboard to change values.
5 For on/o setting values, tapping the setting switches it on or o.
5 When multiple setting values are displayed using buttons, tap a button to select it.
Memo
When the background of a setting value is displayed in red, tapping the setting again displays the NUMBER INPUT screen (p. 19). You can enter a
numerical value by tapping the number keys.
* The NUMBER INPUT screen is not displayed for items such as those where you enter values that include a decimal point or select text, even if
the setting value’s background is displayed in red.
At this time, on the V-1200HDR, you can change the setting value only by using the [VALUE] dial.
In V-1200HD RCS, you can use either the [VALUE] dial or [] and [] on the computer keyboard to change the value.
V-1200HDR
5 You can change a setting value rapidly by holding down the [ENTER] button and turning the [VALUE] dial.
5 Holding down the [ENTER] button and pressing the [EXIT] button returns the currently selected setting to its default value. Continuing to hold
down these buttons returns related settings displayed on the same screen to their default values.
To Next Page
Loading...
Need help?
General
