70
Other Features
STILL MEMORY Screen
At the STILL MEMORY screen, you can import still images and change still-image labels.
The still-image les are read in from a USB ash drive connected to the V-1200HD. Still images created by capture operation at the “POST PROCESS
Screen” (p. 48) are also saved in STILL MEMORY.
You can send imported still images to cross points by assigning them at the “STILL INPUT Screen” (p. 35).
NOTE
Still images captured at the POST PROCESS screen and saved in STILL MEMORY are deleted when the power to the V-1200HD is turned o.
1. Tap <STILL> at the ROOT MENU, making the STILL MEMORY screen appear.
STILL indicator
About the STILL Indicator
The STILL indicator shows the status of each memory on the STILL MEMORY screen.
Illuminated color Status
Green A still image has been imported.
Red A still image is now being imported.
Unlighted No still image has been imported.
Importing a Still Image from a USB Flash Drive
1. Connect the USB ash drive where the still-image le is saved to the USB port on the front panel of the V-1200HD.
2. At the STILL MEMORY screen, tap <LOAD>, then tap the memory number for the still image you want to import.
The <SELECT> screen appears.
You can change the page by tapping the following buttons.
Back 1 page/Ahead 1 page
Back 4 pages/Ahead 4 pages
3. Tap the still image to import to select it.
The still image is imported.
Memo
5 Save still-image data in the root directory of the USB ash drive, in the format and at the size described below.
Data that is in another format or exceeds the maximum size cannot be imported.
Format
Windows Bitmap le (.bmp) in uncompressed 24-bit pixel format, or Portable Network Graphic le (.png)
* With alpha channel support
Size Maximum 1,920x1,080
File name Up to 8 single-byte alphanumeric characters
5 A still image imported from a USB ash drive is copied to the V-1200HD’s internal memory.
The still image is automatically loaded from internal memory at the next startup.
5 While importing a still image is in progress, operations to capture a still image (p. 48), import another still image (this section), or delete a still
image (p. 71) are not possible.
To Next Page
Loading...
Need help?
General
