45
4:2:2 Process Settings
MEMORY Screen
Using MEMORY screen, you can save and recall all setting values for respective compositions.
1. Tapping <MEMORY> at a COMPOSITION displays the MEMORY screen.
Name
Description
PASTE
This overwrites the current composition with all setting values of a copied
composition.
COPY This copies all setting values of the current composition.
1–4
When in the RECALL mode
Tapping a number recalls all setting values of the composition stored at the preset,
overwriting the current composition.
When in the STORE mode
Tapping a number stores all setting values of the current composition at the preset.
* Storing setting values at a number where values are already stored overwrites
the old data.
RECALL/STORE This switches between the RECALL mode (green) and the STORE mode (red).
NOTE
5 The values of memory settings are saved internally in the V-1200HD. They are not saved in the controller.
5 When V-1200HD RCS is started in the oine mode, data saved in memory is lost when you quit V-1200HD RCS.
* You can save the state of settings in the oine mode to the computer. For details, refer to “Saving Setting Values As a File on the Computer”
(p. 81).
To Next Page
Loading...
Need help?
General
