Reference Manual
00809-0100-4360, Rev BA
August 2008
Rosemount 1151
3-14
Changing a Transmitter Address
To change the address of a multidropped transmitter, follow these fast key
sequences. To activate multidrop communication, the transmitter address
must be changed to a number from 1 to 15.
Polling a Multidropped Loop
Polling a multidropped loop determines the model, address, and number of
transmitters on the given loop.
HART Comm. Fast Key Sequence 1, 4, 3, 3, 1
HART Comm. Fast Key Sequence 1, 1, 1
To Next Page
Loading...
