Reference Manual
00809-0100-4360, Rev BA
August 2008
Rosemount 1151
www.rosemount.com
Section 1 Introduction
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Models Covered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
USING THIS MANUAL This manual provides information on installation, operation, and maintenance
of Rosemount 1151 Pressure Transmitters. This manual is organized into the
following sections:
Section 2–Installation
This section provides mechanical and electrical installation instructions.
Section 3–Configuration
This section contains commissioning, output check, basic setup, LCD Display
configuration, detailed setup, diagnostic and services, and advanced
functions.
Section 4–Operation and Maintenance
This section contains calibration and trim procedures.
Section 5–Troubleshooting
This section provides troubleshooting techniques for the most common
operating problems.
Section 6–Retrofitting the Rosemount 1151 Transmitter
This section describes how the Rosemount Smart Retrofit Kit can be used to
retrofit a Rosemount 1151AP, DP, GP, HP, or LT transmitter with 4-20 mA
linear or square root output.
Appendix A–Reference Information
This appendix supplies reference and specification data, as well as ordering
information and spare parts tables.
Appendix B–Product Certifications
This appendix contains European directive information, Hazardous Location
Certifications, and approval drawings.
Appendix C–Glossary
This section provides brief definitions of the terms used in this manual.
Index
This section provides a comprehensive index.
To Next Page
Loading...
