Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
164
Specifications and Reference Data
Flowmeter installed in flanged pipe spool section
(option codes H3, H4, and H5)
All pipe spool sections are flanged pipe sections.
The flanged pipe spool section is constructed from the
same material as the Pipe Material/Mounting Assembly
Material.
Consult the factory for remote temperature measurement
and ANSI ratings above 600# and DIN flanges.
Available in carbon steel (A105) and 316 stainless steel.
Table 17. Flanged Pipe Spool Section Schedule
ANSI Schedule
150# ANSI 40
300# ANSI 40
600# ANSI 80
Table 18. Flange Pipe Spool Section Length
Nominal pipe size Length
2-in. (50 mm) 10.52-in. (267.2 mm)
3-in. (80 mm) 11.37-in. (288.8 mm)
4-in. (100 mm) 12.74-in. (323.6 mm)
6-in. (150 mm) 14.33-in. (364.0 mm)
8-in. (200 mm) 16.58-in. (421.1 mm)
To Next Page
Loading...
Need help?
General
