Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
175
Specifications and Reference Data
Special inspection
QC1 Visual and dimensional inspection with certificate ★
QC7 Inspection and performance certificate ★
Material traceability certification
Q8 Material traceability certification per EN10204:2004 3.1 ★
Code conformance
J2 ANSI/ASME B31.1
J3 ANSI/ASME B31.3
J4 ANSI/ASME B31.8
Materials conformance
(11)
J5 NACE MR-0175/ISO 15156
Country certification
J1 Canadian Registration
Typical model number: 405 C S 040 N 040 D3
1. Available with primary element technology P only.
2. For the 10-in. (250 mm) and 12-in. (300 mm) line size, the alignment ring must be ordered (Installation Accessories).
3. 10-in. (250 mm) and 12-in. (300 mm) line sizes not available with Primary Element Technology A.
4. Available with primary element technology A only.
5. For 2-in. (50 mm) line sizes the Beta ratio is 0.6 for Primary Element Type code C.
6. A3 transmitter connection available with primary element technology C or P only.
7. Available with primary element technology C only.
8. Available with primary element technology C or A only.
9. For Annubar sensor option A, consult factory for pipe schedules other than Sch. 40.
10. Available with primary element technology C or P only.
11. Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental
limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
Table 26. Rosemount 405C Compact Primary Element Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
To Next Page
Loading...
Need help?
General
