Reference Manual
00809-0100-4664, Rev BA
January 2010
A-5
Rosemount 8712
Damping
Adjustable between 0.0 and 256 seconds
Sensor Compensation
Rosemount sensors are flow-calibrated and assigned a calibration factor at
the factory. The calibration factor is entered into the transmitter, enabling
interchangeability of sensors without calculations or a compromise
in accuracy.
8712E transmitters and other manufacturers’ sensors can be calibrated at
known process conditions or at the Rosemount NIST-Traceable Flow Facility.
Transmitters calibrated on site require a two-step procedure to match a
known flow rate. This procedure can be found in the Operations Manual
00809-0100-4664.
Diagnostics
Basic
Self test
Transmitter faults
Analog output test
Pulse output test
Tunable empty pipe
Reverse flow
Coil circuit fault
Electronics temperature
Advanced (DA1 Suite)
Ground/wiring fault
High process noise
Advanced (DA2 Suite)
8714i Meter Verification
To Next Page
Loading...
