Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
www.rosemount.com
Appendix B Approval Information
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1
PRODUCT
CERTIFICATIONS
APPROVED
MANUFACTURING
LOCATIONS
Rosemount Inc. — Eden Prairie, Minnesota, USA
Fisher-Rosemount Technologias de Flujo, S.A. de C.V. — Chihuahua Mexico
Emerson Process Management Flow — Ede, The Netherlands
Asia Flow Technology Center — Nanjing, China
European Directive
Information
The EC declaration of conformity can be found in document number
00825-0100-4664. The most recent revision can be found at
www.rosemount.com.
Type n protection type in accordance with EN 50021, EN 60079-15
• Closing of entries in the device must be carried out using the
appropriate EEx e or EEx n metal cable gland and metal blanking plug
or any appropriate ATEX approved cable gland and blanking plug with
IP66 rating certified by an EU approved certification body.
CE Marking
C-Tick Marking
Hazardous Locations
Certifications
North American Certifications
FM Approvals
N0 Non-incendive for Class I, Division 2, Groups A, B, C, and D non-flammable fluids (T4 at 40
°C), and Dust-ignition proof Class II/III, Division 1, Groups E, F, and G (T4 at 40 °C)
Hazardous locations; Enclosure Type 4X
N5 Non-incendive for Class I, Division 2, Groups A, B, C, and D flammable fluids (T4 at 40 °C),
and Dust-ignition proof Class II/III, Division 1, Groups E, F, and G (T4 at 40 °C) Hazardous
locations; Enclosure Type 4X
Requires sensors with N5 Approval
To Next Page
Loading...
