Rosemount 8712 - HART Field Communicator Operation; HandHeld Communicator; Connections and Hardware; Basic Features

Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
www.rosemount.com
Appendix F HART Field Communicator
Operation
HandHeld Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . page F-1
Connections and Hardware . . . . . . . . . . . . . . . . . . . . . . . .page F-2
Basic Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page F-3
Menus and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page F-5
HANDHELD
COMMUNICATOR
NOTE
Please refer to the Handheld Communicator manual for detailed instructions
on the use, features, and full capabilities of the Handheld Communicator.
Explosions can result in death or serious injury.
Do not make connections to the serial port or NiCad recharger jack in an
explosive atmosphere.
Before connecting the Handheld Communicator in an explosive atmosphere, make sure the
instruments in the loop are installed in accordance with intrinsically safe or non-incendive
field wiring practices.