Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
www.rosemount.com
Section 3 Configuration
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Installation Check and Guide . . . . . . . . . . . . . . . . . . . . . . page 3-1
Basic Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-3
LOI Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-4
Diagnostic Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-6
Process Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-6
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3-8
INTRODUCTION This section covers basic operation, software functionality, and configuration
procedures for the Rosemount 8712 Magnetic Flowmeter Transmitter. For
information on connecting another manufacturer’s sensor, refer to “Universal
Sensor Wiring Diagrams” on page E-1.
The Rosemount 8712 features a full range of software functions for
configuration of output from the transmitter. Software functions are accessed
through the LOI, AMS, a Handheld Communicator, or a control system.
Configuration variables may be changed at any time and specific instructions
are provided through on-screen instructions.
INSTALLATION CHECK
AND GUIDE
Use this guide to check new installations of Rosemount magnetic flowmeter
systems that appear to malfunction.
Before You Begin
Table 3-1. Parameters
Basic Set-up Parameters Page
Review page 3-6
Process Variables page 3-6
Basic Setup page 3-8
Flow Units page 3-8
Range Values page 3-11
PV Sensor Calibration Number page 3-12
Totalizer Setup page 3-7
To Next Page
Loading...
